This bare die suits use in highly integrated sensor driven health care products, wearables and meter modules. It's power efficiency, small-scale and flexible interfacing provide ease of implementation.
Features:
- LCD Driver:
- 40SEG × 4COM
- 36SEG × 8COM
- 64kB Flash, 4kB RAM, 40B display RAM
- x3 clock generation sources
- x36 GPIO
- x2 8-Bit Timers, x3 16-Bit Timer, x1 16-Bit PWM Timer, Watchdog Timer, Clock Timer, Stopwatch Timer, 8-bit OSC1 timer
- Supply-Voltage detector
- Multiple serial interfaces: x2 UART, x1 SPI, x2 I2C
- IR remote controller
- 10-Bit SAR ADC
- RF converter
- Multiple reset & interrupt protocols
- Very small form factor capable of ultra-thin height profile
Power Consumption:
- SLEEP Mode:
- 0.75µA (OSC1 = OFF, IOSC = OFF, OSC3 = OFF)
- HALT Mode:
- 2.5µA (OSC1 = 32kHz, IOSC = OFF, OSC3 = OFF, PCKEN[1:0] = 0x0, LCD OFF)
- 3.5µA (OSC1 = 32kHz, IOSC = OFF, OSC3 = OFF, PCKEN[1:0] = 0x0, LCD ON (checker pattern displayed, highest contrast, VC2 reference voltage))
- RUN Mode:
- 15µA (CPU = OSC1, OSC1 = 32kHz, IOSC = OFF, OSC3 = OFF, LCD OFF)
- 410µA (CPU = OSC3, OSC1 = 32kHz, IOSC = OFF, OSC3 = 1MHz ceramic oscillation)
Applications:
- Low power & high integration display systems
- Battery driven controllers
- Wearable products
- Remote Sensors
- MCM, MCP and SiP integration
Vendor:
Epson
Electrical Datasheet
Die Physical Data:
Footprint: 15.038mm² (23309.567mil²)
Request Pad Layout
Epson
Electrical Datasheet
Die Physical Data:
Footprint: 15.038mm² (23309.567mil²)
Request Pad Layout
Product Families: Used for this device are tabulated below.
Functional:
- I2C: 1
- SPI: 1
- UART: 2
- DMA: -Ch
- Comp Inputs: n/a
- TMR 16-bit: 3
- TMR 32-bit: n/a
- GPIO: 36
Specification:
LCD Seg.: 288
ADC: f(MAX): 8.2MHz
NVM: 64KB
RAM: 4KB
VCC (Min): 1.8V
VCC (Max): 3.6V
Active Power: 410µA/MHz
S/B Pwr (LPM/HALT): 2.50µA
Sleep Pwr: 0.75µA
ADC: f(MAX): 8.2MHz
NVM: 64KB
RAM: 4KB
VCC (Min): 1.8V
VCC (Max): 3.6V
Active Power: 410µA/MHz
S/B Pwr (LPM/HALT): 2.50µA
Sleep Pwr: 0.75µA
Other Detail: Important information for this device is tabulated below.
Traffic light setting for Minimum Order Quantity indicates the following:
- Green:Available from stock or at low factory MOQ.
- Amber: Available on factory order with MOQ.
- Red: High factory MOQ may apply, please ask for details.
Traffic light setting for High Reliability indicates the following:
- Green: This bare die is specified and tested for use in high reliability applications.
- Amber: This bare die can meet higher reliability specifications with additional testing & qualification, please ask for details.
- Red: This bare die is not specified or specifically designed for use in high reliability applications.
Traffic light setting for Space Grade indicates the following:
- Green: This bare die is qualified for space applications or has space level qualification data, please ask for details.
- Amber: This bare die can be specified for space applications with additional testing and qualification, please ask for details.
- Red: Suitability of this bare die for space applications is unknown and requires further qualification, please ask for details.
