Supporting ultra-low voltage 1.2V Flash operation, this bare die is peripherally equipped for a wide range of general purpose battery driven applications. It's small-scale and flexible interfacing provide ease of implementation.
Features:
- 16kB Flash, 2kB RAM
- x4 clock generation sources
- x34 GPIO
- x4 16-Bit Timers, x2 16-Bit PWM Timers, Watchdog Timer, RTC
- Supply-Voltage detector
- Multiple serial interfaces: x2 UART, x2 SPIA, x1 I2C
- Sound generator
- IR remote controller
- RF converter
- 12-Bit SAR ADC
- Multiplier / Divider
- Multiple reset & interrupt protocols
- Very small form factor capable of ultra-thin height profile
Power Consumption:
- SLEEP Mode:
- 0.15µA (IOSC = OFF, OSC1 = OFF, OSC3 = OFF)
- HALT Mode:
- 0.5µA (OSC1 = 32 kHz, RTC = ON)
- 0.3µA (OSC1 = 32 kHz, RTC = ON, super economy mode)
- RUN Mode:
- 8µA (OSC1 = 32 kHz, RTC = ON, CPU = OSC1)
- 4µA (OSC1 = 32 kHz, RTC = ON, CPU = OSC1, super economy mode)
- 250µA (OSC3 = 1 MHz (ceramic oscillator), OSC1 = 32.768 kHz (crystal oscillator), RTC = ON, CPU = OSC3)
Applications:
- Low power & high integration display systems
- Battery driven controllers
- Wearable products
- Remote Sensors
- MCM, MCP and SiP integration
Vendor:
Epson
Electrical Datasheet
Die Physical Data:
Footprint: 4.887mm² (7575.106mil²)
Request Pad Layout
Epson
Electrical Datasheet
Die Physical Data:
Footprint: 4.887mm² (7575.106mil²)
Request Pad Layout
Product Families: Used for this device are tabulated below.
Functional:
- I2C: 1
- SPI: 2
- UART: 2
- DMA: -Ch
- Comp Inputs: n/a
- TMR 16-bit: 4
- TMR 32-bit: n/a
- GPIO: 35
Specification:
ADC: f(MAX): 4MHz
NVM: 32KB
RAM: 2KB
VCC (Min): 1.2V
VCC (Max): 3.6V
Active Power: 250µA/MHz
S/B Pwr (LPM/HALT): 0.3µA
Sleep Pwr: 0.15µA
Wake Time: n/a
NVM: 32KB
RAM: 2KB
VCC (Min): 1.2V
VCC (Max): 3.6V
Active Power: 250µA/MHz
S/B Pwr (LPM/HALT): 0.3µA
Sleep Pwr: 0.15µA
Wake Time: n/a
Other Detail: Important information for this device is tabulated below.
Traffic light setting for Minimum Order Quantity indicates the following:
- Green:Available from stock or at low factory MOQ.
- Amber: Available on factory order with MOQ.
- Red: High factory MOQ may apply, please ask for details.
Traffic light setting for High Reliability indicates the following:
- Green: This bare die is specified and tested for use in high reliability applications.
- Amber: This bare die can meet higher reliability specifications with additional testing & qualification, please ask for details.
- Red: This bare die is not specified or specifically designed for use in high reliability applications.
Traffic light setting for Space Grade indicates the following:
- Green: This bare die is qualified for space applications or has space level qualification data, please ask for details.
- Amber: This bare die can be specified for space applications with additional testing and qualification, please ask for details.
- Red: Suitability of this bare die for space applications is unknown and requires further qualification, please ask for details.
