Supporting low power and high-speed operation, this bare die is peripherally equipped for a wide range of general purpose sense driven applications. It's small-scale and flexible interfacing provide ease of implementation.
Features:
- 128kB Flash, 16kB RAM
- x3 clock generation sources
- x40 GPIO
- x5 16-Bit Timers, x4 16-Bit PWM Timers, Clock Timer, Stopwatch Timer, Watchdog Timer
- Supply-Voltage detector
- Multiple serial interfaces: x2 UART, x3 SPI, x2 I2C, x2 USI
- IR remote controller
- 10-Bit SAR ADC
- Voltage Regulator
- Multiple reset & interrupt protocols
- Very small form factor capable of ultra-thin height profile
Power Consumption:
- SLEEP Mode:
- 1.2µA (OSC1 = Off, IOSC = Off, OSC3 = Off)
- HALT Mode:
- 3.1µA (OSC1 = 32 kHz, IOSC = Off, OSC3 = Off)
- RUN Mode:
- 16µA (OSC1 = 32 kHz, IOSC = Off, OSC3 = Off)
- 3000µA (OSC1 = Off, IOSC = Off, OSC3 = 8 MHz ceramic)
- 4500µA (OSC1 = Off, IOSC = 12 MHz, OSC3 = Off)
Applications:
- Low power & high integration display systems
- Battery driven controllers
- Wearable products
- Remote Sensors
- MCM, MCP and SiP integration
Vendor:
Epson
Electrical Datasheet
Die Physical Data:
Footprint: 9.841mm² (15253.239mil²)
Request Pad Layout
Epson
Electrical Datasheet
Die Physical Data:
Footprint: 9.841mm² (15253.239mil²)
Request Pad Layout
Product Families: Used for this device are tabulated below.
Functional:
- I2C: 2
- SPI: 3
- UART: 2
- DMA: -Ch
- Comp Inputs: n/a
- TMR 16-bit: 5
- TMR 32-bit: n/a
- GPIO: 40
Specification:
ADC: f(MAX): 24MHz
NVM: 128KB
RAM: 16KB
VCC (Min): 2.0V
VCC (Max): 5.5V
Active Power: 4,500µA/MHz
S/B Pwr (LPM/HALT): 3.1µA
Sleep Pwr: 1.20µA
Wake Time: n/a
NVM: 128KB
RAM: 16KB
VCC (Min): 2.0V
VCC (Max): 5.5V
Active Power: 4,500µA/MHz
S/B Pwr (LPM/HALT): 3.1µA
Sleep Pwr: 1.20µA
Wake Time: n/a
Other Detail: Important information for this device is tabulated below.
Traffic light setting for Minimum Order Quantity indicates the following:
- Green:Available from stock or at low factory MOQ.
- Amber: Available on factory order with MOQ.
- Red: High factory MOQ may apply, please ask for details.
Traffic light setting for High Reliability indicates the following:
- Green: This bare die is specified and tested for use in high reliability applications.
- Amber: This bare die can meet higher reliability specifications with additional testing & qualification, please ask for details.
- Red: This bare die is not specified or specifically designed for use in high reliability applications.
Traffic light setting for Space Grade indicates the following:
- Green: This bare die is qualified for space applications or has space level qualification data, please ask for details.
- Amber: This bare die can be specified for space applications with additional testing and qualification, please ask for details.
- Red: Suitability of this bare die for space applications is unknown and requires further qualification, please ask for details.
