Back to List

Bare Die Product Detail: 74LV04

Gates:
The 74LV04 Hex Inverter consists of x6 buffered independent gates perfoming Boolean function Y= Ā in positive logic. Optimised for low voltage operation, inputs are compatible with CMOS & also accept TTL directly at supply between 2.7 to 3.6V

This device is optimized for low voltage operation and interfaces both low voltage CMOS and TTL. The device is a direct replacement for the 74LV04 produced by Philips / NXP / Nexperia and Texas Instruments

Features:
** END OF LIFE ** NOT RECOMMENDED FOR NEW DESIGN

Specified at 1.2V for low voltage operation
Wide supply voltage range
Output Drive Capability: 10 LSTTL Loads
Inputs Directly interface TTL (V_CC = 2.7 to 3.6V)
Outputs Directly Interface to CMOS, NMOS, and TTL
Low Input Current: 1µA
Direct drop-in replacement for obsolete components in long term programs
Function compatible with 74HC04

Vendor:
Silicon Supplies
Electrical Datasheet

Die Physical Data:
Footprint: 1.620mm² (2511.008mil²)
Request Pad Layout

Product Families: Used for this device are tabulated below.

Gates
Inverting Buffer/Driver

Functional:

Type: NOT
I/P Level: CMOS/TTL
O/P Level: CMOS
Bits: 6
Schmitt Trigger: No
3-State O/P: No

Specification:

V_{CC (Min)}: 1.20V
V_{CC (Max)}: 5.00V
f_MIN @ V_NOM: 110MHz
t_{pd (Max)} @ V_NOM: 6.5ns
I_{CC (Max)} @ V_NOM: 0.020mA
V_{NOM (Max)}: 5.00V
Output Drive _(Max): 50.0mA

Functional:

I/P Level: CMOS/TTL
O/P Level: CMOS
Bits: 6
3-State O/P: No
Schmitt Trigger: No

Specification:

V_{CC (Min)}: 1.20V
V_{CC (Max)}: 5.00V
f_MIN @ V_NOM: 110MHz
t_{pd (Max)} @ V_NOM: 6.5ns
I_{CC (Max)} @ V_NOM: 0.0200mA
V_{NOM (Max)}: 5.0V
Output Drive _(Max): 50.0mA

Other Detail: Important information for this device is tabulated below.

Traffic light setting for Minimum Order Quantity indicates the following:

Green:Available from stock or at low factory MOQ.
Amber: Available on factory order with MOQ.
Red: High factory MOQ may apply, please ask for details.

Traffic light setting for High Reliability indicates the following:

Green: This bare die is specified and tested for use in high reliability applications.
Amber: This bare die can meet higher reliability specifications with additional testing & qualification, please ask for details.
Red: This bare die is not specified or specifically designed for use in high reliability applications.

Traffic light setting for Space Grade indicates the following:

Green: This bare die is qualified for space applications or has space level qualification data, please ask for details.
Amber: This bare die can be specified for space applications with additional testing and qualification, please ask for details.
Red: Suitability of this bare die for space applications is unknown and requires further qualification, please ask for details.