Innovate > Integrate > Empower - Design at Die Level

  Back to List

Bare Die Product Detail: 54LVC1G34

Gates:
The 54LVC1G34 single buffer gate performs the Boolean function Y = A. The buffer can be driven by either 3.3V or 5V inputs enabling use of this device in a mixed 3.3V and 5V environment.
The device is a high reliability upgrade of the industry standard 74LVC1G34 or the SN74LVC1G34 made by Texas Instruments (TI) and offers a flexible logic interface for small size highly integrated mixed voltage systems.
Features:
  • Ideal for small form factor high integration applications
  • The only hi-rel version of this function available in bare die form
  • Inputs directly interface TTL & CMOS
  • Inputs accept up to 5.5V enabling level translation down to VCC
  • Outputs directly interface CMOS, NMOS, and TTL
  • Wide Supply Voltage: VCC 1.65V - 5.5V
  • Output Drive capability: ± 32mA
  • Low Quiescent Current: 10µA max
  • High speed: tpd 5.2ns max, VCC = 3.3V
  • Low Input Current: 1µA
  • Military temperature range
  • High reliability replacement for commercial 74LVC1G04
  • Committed long term support with no die mask changes

Applications:

  • Interfacing mixed voltage systems
  • Voltage Level Shifting
  • Power Down Signal Isolation
  • Single Controller: Analog and Digital
  • General Purpose Logic
Vendor:
Silicon Supplies
  Electrical Datasheet

Die Physical Data:
Footprint: 0.160mm² (255mil²)
  Request Pad Layout
Product Families: Used for this device are tabulated below.
Functional:
  • Type: BUFFER/DRIVER
  • I/P Level: CMOS/TTL
  • O/P Level: CMOS
  • Bits: 1
  • Schmitt Trigger: No
  • 3-State O/P: No
Specification:
VCC (Min): 1.65V
VCC (Max): 5.50V
fMIN @ VNOM: 150MHz
tpd (Max) @ VNOM: 4.1ns
ICC (Max) @ VNOM: 0.010mA
VNOM (Max): 5.50V
Output Drive (Max): 32.0mA
Functional:
  • I/P Level: CMOS/TTL
  • O/P Level: CMOS
  • Bits: 1
  • 3-State O/P: No
  • Schmitt Trigger: No
Specification:
VCC (Min): 1.65V
VCC (Max): 5.50V
fMIN @ VNOM: 150MHz
tpd (Max) @ VNOM: 4.1ns
ICC (Max) @ VNOM: 0.0100mA
VNOM (Max): 5.5V
Output Drive (Max): 32.0mA
Other Detail: Important information for this device is tabulated below.
Traffic light setting for Minimum Order Quantity indicates the following:
  • Green:Available from stock or at low factory MOQ.
  • Amber: Available on factory order with MOQ.
  • Red: High factory MOQ may apply, please ask for details.
Traffic light setting for High Reliability indicates the following:
  • Green: This bare die is specified and tested for use in high reliability applications.
  • Amber: This bare die can meet higher reliability specifications with additional testing & qualification, please ask for details.
  • Red: This bare die is not specified or specifically designed for use in high reliability applications.
Traffic light setting for Space Grade indicates the following:
  • Green: This bare die is qualified for space applications or has space level qualification data, please ask for details.
  • Amber: This bare die can be specified for space applications with additional testing and qualification, please ask for details.
  • Red: Suitability of this bare die for space applications is unknown and requires further qualification, please ask for details.

Other Featured Products:

SN74HC04:
Hex Inverters
SN74S08:
Quad 2-input positive-AND gates
SN74ALS00A:
Quadruple 2-Input Positive-NAND Gates
SN74LS00:
Quad 2-input positive-NAND gates
EA2M:
ON Semi Serial 2-Mb SPI Ultra Low-Power EEPROM with ECC for high reliability portable or battery applications.
NTC020N120SC1:
ON Semi 1200 Volt 20mOhm 103A Silicon Carbide MOSFET specified at >=175°C maximum junction temperature.