Innovate > Integrate > Empower - Design at Die Level

  Back to List

Bare Die Product Detail: CD4511B

Decoder/Encoder/Multiplexer:
CMOS BCD-to-7-Segment LED Latch Decoder Drivers
Features:
  • Family:  CD4000
  • Voltage(s) (Nom):  10V
  • tpd @ Nom Voltage(s) :  420ns
  • Nom Voltage (Max):  1.5V
  • Output Drive IOL/IOH (Max):  1.5/-1.5mA
Vendor:
Texas Instruments
  Electrical Datasheet

Die Physical Data:
Footprint: 5.799mm² (8988mil²)
  Request Pad Layout
Product Families: Used for this device are tabulated below.
Functional:
  • I/P Level: CMOS
  • O/P Level: CMOS
  • 3-State O/P: No
  • Function: -
  • Config: -
Specification:
VCC (Min): 3.00V
VCC (Max): 18.00V
fMIN @ VNOM: 8MHz
ICC (Max) @ VNOM: 0.010mA
VNOM (Max): 10.0V
tpd (Max) @ VNOM: 420.0ns
Functional:
  • Channels: 4
  • Function: Decoder/Demultiplexer
  • Config: 4:7
  • Type: Standard
Specification:
fMIN @ VNOM: 8MHz
ICC (Max) @ VNOM: 0.30mA
VNOM (Max): 10V
Output Drive (Max): 1.50mA
tpd (Max) @ VNOM: 420ns
VIN (MIN): 3.00V
VIN (MAX): 18.00V
Other Detail: Important information for this device is tabulated below.
Traffic light setting for Minimum Order Quantity indicates the following:
  • Green:Available from stock or at low factory MOQ.
  • Amber: Available on factory order with MOQ.
  • Red: High factory MOQ may apply, please ask for details.
Traffic light setting for High Reliability indicates the following:
  • Green: This bare die is specified and tested for use in high reliability applications.
  • Amber: This bare die can meet higher reliability specifications with additional testing & qualification, please ask for details.
  • Red: This bare die is not specified or specifically designed for use in high reliability applications.
Traffic light setting for Space Grade indicates the following:
  • Green: This bare die is qualified for space applications or has space level qualification data, please ask for details.
  • Amber: This bare die can be specified for space applications with additional testing and qualification, please ask for details.
  • Red: Suitability of this bare die for space applications is unknown and requires further qualification, please ask for details.

Other Featured Products:

TL062:
Dual Low-Power JFET-Input General-Purpose Operational Amplifier
SN74LS00:
Quad 2-input positive-NAND gates
SN74LS10:
Triple 3-input positive-NAND gates
SN74LS374:
Octal D-Type Edge Triggered Flip-Flops with 3-State Outputs
INN650N080BS:
650 Volt 29 Amp 60mOhm Gallium Nitride (GaN) MOSFET. Metalized with Aluminum on topside for wirebonding.
AMS1200013B3:
1200 Volt 13mOhm Silicon Carbide (SiC) MOSFET with customizable top metal back metals optimized for wire-bonding or sintering.