Back to List

Bare Die Product Detail: 74HC4060

Counter/Arithmetic/Parity Logic:
14-stage Ripple-carry Counter/Divider & Oscillator with 3 oscillator terminals, 10 buffered parallel outputs & Reset. High-to-low clock input increments the counter. Reset is asynchronous & disables the oscillator for low standby power consumption.

Direct replacement for legacy Fairchild 74HC4060, National 74HC4060, Motorola 74HC4060 & Texas Instruments SN74HC4060, CD74HC4060.

Features:
** END OF LIFE ** NOT RECOMMENDED FOR NEW DESIGN

Oscillator configuration allows either RC or crystal oscillator design
Input compatibilty with standard CMOS outputs and LSTTL outputs with use of pull-up resistors
Inputs protected against ESD and transient voltage
All inputs and outputs buffered
Speed of LSTTL with CMOS low power consumption
Output Drive Capability: 15 LSTTL loads
Outputs Directly Interface to CMOS, NMOS, and TTL
Operating Voltage Range: 2.0 to 6.0V
Low Input Current: 1.0µA
High Noise Immunity Characteristic of CMOS Devices
For high reliability versions see part 54HC4060

Vendor:
Silicon Supplies
Electrical Datasheet

Die Physical Data:
Footprint: 2.592mm² (4017.767mil²)
Request Pad Layout

Product Families: Used for this device are tabulated below.

Counter/Arithmetic/Parity Logic

Functional:

I/P Level: CMOS/LVTTL
O/P Level: CMOS
Function: Binary Counter
Bits: 14
3-State O/P: No

Specification:

V_{CC (Min)}: 2.00V
V_{CC (Max)}: 6.00V
f_MIN @ V_NOM: 45MHz
t_{pd (Max)} @ V_NOM: 16.0ns
I_{CC (Max)} @ V_NOM: 0.06mA
Output Drive _(Max): 5.2mA
V_{NOM (Max)}: 6.0V

Other Detail: Important information for this device is tabulated below.

Traffic light setting for Minimum Order Quantity indicates the following:

Green:Available from stock or at low factory MOQ.
Amber: Available on factory order with MOQ.
Red: High factory MOQ may apply, please ask for details.

Traffic light setting for High Reliability indicates the following:

Green: This bare die is specified and tested for use in high reliability applications.
Amber: This bare die can meet higher reliability specifications with additional testing & qualification, please ask for details.
Red: This bare die is not specified or specifically designed for use in high reliability applications.

Traffic light setting for Space Grade indicates the following:

Green: This bare die is qualified for space applications or has space level qualification data, please ask for details.
Amber: This bare die can be specified for space applications with additional testing and qualification, please ask for details.
Red: Suitability of this bare die for space applications is unknown and requires further qualification, please ask for details.