Innovate > Integrate > Empower - Design at Die Level

  Back to List

Bare Die Product Detail: CD4016B

Digital Signal Switch:
The CD4016B quad bilateral switch consists of four independent switches capable of controlling either digital or analog signals for us in signal gating, chopper, modulator, demodulator and CMOS logic implementations.
*** END OF LIFE *** Replacement die options can be obtained by contacting engineering.
Features:
    ** PRODUCT DISCONTINUED **
    • Diode protection on all inputs
    • Linear transfer characteristics
    • Low Noise - 12 nV/√Cycle, f = 1.0 kHz typical
    • High Input Voltage up to 20V
    • Military Temperature Range for High Reliability

    Applications:

    • Analog signal switching/multiplexing
    • Signal gating
    • Squelch control
    • Chopper
    • Modulator/Demodulator
    • Commutating switch
    • Digital signal switching/multiplexing
    • CMOS logic implementation
    • Analog-to-digital/digital-to-analog conversion
    • Digital control of frequency, impedance, phase, and analog-signal gain
Vendor:
SiS OBSOLETE
  Electrical Datasheet

Die Physical Data:
Footprint: 2.163mm² (3352.967mil²)
  Request Pad Layout
Product Families: Used for this device are tabulated below.
Functional:
  • Switch Type: SPST
  • Channels: 4
  • 3-State O/P: No
Specification:
RON: 280Ω
RON (Max): 400Ω
BW (Max): 40MHz
VCC (Min): 3.00V
VCC (Max): 18.00V
IO (CONT): 10A
ICC (Max): 1µA
ICC (Max) @ VNOM: 30.0mA
Functional:
  • Switch Type: SPST
  • Channels: 4
Specification:
RON: 280.00Ω
BW (Max): 40MHz
VCC (Min): 3.00V
VCC (Max): 18.00V
IO (CONT): 10A
Output Drive (Max):   n/a
ICC (Max): 1.00µA
ICC (Max) @ VNOM: 30.00mA
Functional:
  • Channels: 4
  • Config: 1:1 SPST
Specification:
VCC (Min): 3.00V
VCC (Max): 18.00V
RON: 280.00Ω
RON (Max): 400.0Ω
BW (Max): 40MHz
VIO (Min): -0.50V
VIO (Max): 18.50V
IIO (Cont): 10mA
ICC (Max) @ VNOM: 30.00µA
Other Detail: Important information for this device is tabulated below.
Traffic light setting for Minimum Order Quantity indicates the following:
  • Green:Available from stock or at low factory MOQ.
  • Amber: Available on factory order with MOQ.
  • Red: High factory MOQ may apply, please ask for details.
Traffic light setting for High Reliability indicates the following:
  • Green: This bare die is specified and tested for use in high reliability applications.
  • Amber: This bare die can meet higher reliability specifications with additional testing & qualification, please ask for details.
  • Red: This bare die is not specified or specifically designed for use in high reliability applications.
Traffic light setting for Space Grade indicates the following:
  • Green: This bare die is qualified for space applications or has space level qualification data, please ask for details.
  • Amber: This bare die can be specified for space applications with additional testing and qualification, please ask for details.
  • Red: Suitability of this bare die for space applications is unknown and requires further qualification, please ask for details.

Other Featured Products:

LMV791:
17 MHz, Low Noise, CMOS Input, 1.8V Operational Amplifiers with Shutdown
SN74LS04:
Hex inverters
SN74HC20:
Dual 4-Input Positive-NAND Gates
SN74ACT86:
Quadruple 2-Input Exclusive-OR Gates
INN650N080BS:
650 Volt 29 Amp 60mOhm Gallium Nitride (GaN) MOSFET. Metalized with Aluminum on topside for wirebonding.
SiS8017:
4-channel CMOS / LVCMOS Digital Isolator eliminates current noise and provides up to 5kV RMS isolation per UL 1577.