Back to List

Bare Die Product Detail: 74LVC2G66

Digital Signal Switch:
The 74LVC2G66 Dual Single-Pole Single-Throw Analog Switch supports switching of analog and digital signals in both directions across the full supply range.

The device is a direct replacement for NXP 74LVC2G66 or Texas Instruments (TI) SN74LVC2G66 and suits use in highly integrated miniature sensor applications.

Features:

Ideal for small form factor high integration applications
Wide supply voltage: V_CC 1.65V - 5.5V
Very low r_ON : 6Ω Typ, V_CC = 4.5V
High speed: tpd 0.8ns Max, V_CC = 3.3V
Switch current capability: 32mA
TTL input compatibility (V_CC = 3.3V)
Enable inputs accept up to 5.5V
Rail-to-Rail Input / Output
High noise immunity
Tiny Die size
Committed long term support with no die mask changes

Applications:

Analog-to-digital or Digital-to-analog conversion
Signal gating
Chopping
Modulation / De-modulation

Vendor:
Silicon Supplies
Electrical Datasheet

Die Physical Data:
Footprint: 0.389mm² (602.642mil²)
Request Pad Layout

Product Families: Used for this device are tabulated below.

Functional:

Switch Type: SPST
Channels: 2
3-State O/P: No

Specification:

R_ON: 6Ω
R_{ON (Max)}: 0Ω
BW _(Max): 150MHz
V_{CC (Min)}: 1.65V
V_{CC (Max)}: 5.50V
I_{O (CONT)}: 50A
I_{CC (Max)}: 0µA
I_{CC (Max)} @ V_NOM: 10.0mA

Functional:

Switch Type: SPST
Channels: 2

Specification:

R_ON: 6.00Ω
BW _(Max): 150MHz
V_{CC (Min)}: 1.65V
V_{CC (Max)}: 5.50V
I_{O (CONT)}: 50A
Output Drive _(Max): 32mA
I_{CC (Max)}: 0.00µA
I_{CC (Max)} @ V_NOM: 10.00mA

Functional:

Channels: 2
Config: 1:1 SPST

Specification:

V_{CC (Min)}: 1.65V
V_{CC (Max)}: 5.50V
R_ON: 6.00Ω
R_{ON (Max)}: 10.0Ω
BW _(Max): 150MHz
V_{IO (Min)}: 0.00V
V_{IO (Max)}: 5.50V
I_{IO (Cont)}: 50mA
I_{CC (Max)} @ V_NOM: 10.00µA

Other Detail: Important information for this device is tabulated below.

Traffic light setting for Minimum Order Quantity indicates the following:

Green:Available from stock or at low factory MOQ.
Amber: Available on factory order with MOQ.
Red: High factory MOQ may apply, please ask for details.

Traffic light setting for High Reliability indicates the following:

Green: This bare die is specified and tested for use in high reliability applications.
Amber: This bare die can meet higher reliability specifications with additional testing & qualification, please ask for details.
Red: This bare die is not specified or specifically designed for use in high reliability applications.

Traffic light setting for Space Grade indicates the following:

Green: This bare die is qualified for space applications or has space level qualification data, please ask for details.
Amber: This bare die can be specified for space applications with additional testing and qualification, please ask for details.
Red: Suitability of this bare die for space applications is unknown and requires further qualification, please ask for details.