Back to List

Bare Die Product Detail: CD4016B

Analog Signal Switch:
The CD4016B quad bilateral switch consists of four independent switches capable of controlling either digital or analog signals for us in signal gating, chopper, modulator, demodulator and CMOS logic implementations.

The device directly replaces legacy National CD4016B, Motorola MC14016B, RCA Harris CD4016A and Texas Instruments CD4016B..

Features:
** END OF LIFE ** NOT RECOMMENDED FOR NEW DESIGN

Diode protection on all inputs
Linear transfer characteristics
Low Noise - 12 nV/√Cycle, f = 1.0 kHz typical
High Input Voltage up to 20V
Military Temperature Range for High Reliability

Applications:

Analog signal switching/multiplexing
Signal gating
Squelch control
Chopper
Modulator/Demodulator
Commutating switch
Digital signal switching/multiplexing
CMOS logic implementation
Analog-to-digital/digital-to-analog conversion
Digital control of frequency, impedance, phase, and analog-signal gain

Vendor:
Silicon Supplies
Electrical Datasheet

Die Physical Data:
Footprint: 2.163mm² (3352.967mil²)
Request Pad Layout

Product Families: Used for this device are tabulated below.

Functional:

Switch Type: SPST
Channels: 4

Specification:

R_ON: 280.00Ω
BW _(Max): 40MHz
V_{CC (Min)}: 3.00V
V_{CC (Max)}: 18.00V
I_{O (CONT)}: 10A
Output Drive _(Max): n/a
I_{CC (Max)}: 1.00µA
I_{CC (Max)} @ V_NOM: 30.00mA

Functional:

Switch Type: SPST
Channels: 4
3-State O/P: No

Specification:

R_ON: 280Ω
R_{ON (Max)}: 400Ω
BW _(Max): 40MHz
V_{CC (Min)}: 3.00V
V_{CC (Max)}: 18.00V
I_{O (CONT)}: 10A
I_{CC (Max)}: 1µA
I_{CC (Max)} @ V_NOM: 30.0mA

Functional:

Channels: 4
Config: 1:1 SPST

Specification:

V_{CC (Min)}: 3.00V
V_{CC (Max)}: 18.00V
R_ON: 280.00Ω
R_{ON (Max)}: 400.0Ω
BW _(Max): 40MHz
V_{IO (Min)}: -0.50V
V_{IO (Max)}: 18.50V
I_{IO (Cont)}: 10mA
I_{CC (Max)} @ V_NOM: 30.00µA

Other Detail: Important information for this device is tabulated below.

Traffic light setting for Minimum Order Quantity indicates the following:

Green:Available from stock or at low factory MOQ.
Amber: Available on factory order with MOQ.
Red: High factory MOQ may apply, please ask for details.

Traffic light setting for High Reliability indicates the following:

Green: This bare die is specified and tested for use in high reliability applications.
Amber: This bare die can meet higher reliability specifications with additional testing & qualification, please ask for details.
Red: This bare die is not specified or specifically designed for use in high reliability applications.

Traffic light setting for Space Grade indicates the following:

Green: This bare die is qualified for space applications or has space level qualification data, please ask for details.
Amber: This bare die can be specified for space applications with additional testing and qualification, please ask for details.
Red: Suitability of this bare die for space applications is unknown and requires further qualification, please ask for details.