Direct replacement for legacy Fairchild CD4030B, National CD4030B, Motorola MC14030B & Texas Instruments CD4030BH. This device operates over the full military temperature range & is well suited for high reliability applications.
Features:
** END OF LIFE ** NOT RECOMMENDED FOR NEW DESIGN
** END OF LIFE ** NOT RECOMMENDED FOR NEW DESIGN
- Characterized over full Military Temperature Range
- High Input Voltage up to 20V
- Noise immunity greater than 50%
- Symmetrical Sink & Source Currents
- Drives x2 Low-Power TTL loads or x1 LSTTL load
- All outputs buffered
- ESD input protection diode clamps on VDD and VSS
- Direct drop-in replacement for obsolete components in long term programs.
- Long term support with no mask changes
Vendor:
Silicon Supplies
Electrical Datasheet
Die Physical Data:
Footprint: 1.935mm² (3000.003mil²)
Request Pad Layout
Silicon Supplies
Electrical Datasheet
Die Physical Data:
Footprint: 1.935mm² (3000.003mil²)
Request Pad Layout
Product Families: Used for this device are tabulated below.
Functional:
- I/P Level: CMOS
- O/P Level: CMOS
- Bits: 4
Specification:
VCC (Min): 3.00V
VCC (Max): 18.00V
fMIN @ VNOM: 8MHz
tpd (Max) @ VNOM: 130.0ns
ICC (Max) @ VNOM: 0.0005mA
VNOM (Max): 10.0V
Output Drive (Max): 1.6mA
VCC (Max): 18.00V
fMIN @ VNOM: 8MHz
tpd (Max) @ VNOM: 130.0ns
ICC (Max) @ VNOM: 0.0005mA
VNOM (Max): 10.0V
Output Drive (Max): 1.6mA
Other Detail: Important information for this device is tabulated below.
Traffic light setting for Minimum Order Quantity indicates the following:
- Green:Available from stock or at low factory MOQ.
- Amber: Available on factory order with MOQ.
- Red: High factory MOQ may apply, please ask for details.
Traffic light setting for High Reliability indicates the following:
- Green: This bare die is specified and tested for use in high reliability applications.
- Amber: This bare die can meet higher reliability specifications with additional testing & qualification, please ask for details.
- Red: This bare die is not specified or specifically designed for use in high reliability applications.
Traffic light setting for Space Grade indicates the following:
- Green: This bare die is qualified for space applications or has space level qualification data, please ask for details.
- Amber: This bare die can be specified for space applications with additional testing and qualification, please ask for details.
- Red: Suitability of this bare die for space applications is unknown and requires further qualification, please ask for details.
