Back to List

Bare Die Product Detail: 74ACT38

NAND Gate:
74ACT38 provides x4 independent 2-input NAND gates performing Boolean function Y = (A • B)\ or Y = A\ + B\. Inputs directly accept standard CMOS outputs & LSTTL outputs. Open-drain outputs enable wired-OR or wired-AND functionality.

The device is a functional replacement for the obsoleted National 74F38, Fairchild 74F38 and Texas Instruments SN74F38. The device provides the same speed of the F series with the same TTL input functionality.

Features:
** END OF LIFE ** NOT RECOMMENDED FOR NEW DESIGN

Inputs Directly Interface TTL
High Output Drive Capability: 24mA
Open-drain output for wired-OR/wired-AND function
Speed of LSTTL with CMOS low power consumption
Outputs Directly Interface to CMOS, NMOS, and TTL
Low power dissipation: 4µA max at 25°C
Operating Voltage Range: 4.5 to 5.5V
Lower power alternative to bipolar logic

Vendor:
Silicon Supplies
Electrical Datasheet

Die Physical Data:
Footprint: 1.190mm² (1844.506mil²)
Request Pad Layout

Product Families: Used for this device are tabulated below.

NAND Gate

Functional:

I/P Level: CMOS/TTL
O/P Level: CMOS
Bits: 4
Schmitt Trigger: No

Specification:

V_{CC (Min)}: 4.50V
V_{CC (Max)}: 5.50V
f_MIN @ V_NOM: 90MHz
t_{pd (Max)} @ V_NOM: 7.0ns
I_{CC (Max)} @ V_NOM: 0.0400mA
V_{NOM (Max)}: 5.5V
Output Drive _(Max): 24mA

Other Detail: Important information for this device is tabulated below.

Traffic light setting for Minimum Order Quantity indicates the following:

Green:Available from stock or at low factory MOQ.
Amber: Available on factory order with MOQ.
Red: High factory MOQ may apply, please ask for details.

Traffic light setting for High Reliability indicates the following:

Green: This bare die is specified and tested for use in high reliability applications.
Amber: This bare die can meet higher reliability specifications with additional testing & qualification, please ask for details.
Red: This bare die is not specified or specifically designed for use in high reliability applications.

Traffic light setting for Space Grade indicates the following:

Green: This bare die is qualified for space applications or has space level qualification data, please ask for details.
Amber: This bare die can be specified for space applications with additional testing and qualification, please ask for details.
Red: Suitability of this bare die for space applications is unknown and requires further qualification, please ask for details.