Back to List

Bare Die Product Detail: 54ACT11

AND Gate:
The 54ACT11 is a triple 3-input AND gate with LSTTL compatible inputs. The device contains x3 independent gates each performing Boolean function Y = A • B • C or Y = (A\ + B\ + C\)\ in positive logic.

The device directly replaces legacy National / Fairchild 54ACT11, Motorola MC54ACT11, RCA HARRIS 54ACT11 and Texas Instruments SN54ACT11.

Features:
** END OF LIFE ** NOT RECOMMENDED FOR NEW DESIGN

3 channel with triple input per channel
Inputs Directly Interface TTL
High Output Current Capability: 24mA
Typical propagation delay below 10 nanoseconds
Speed of LSTTL with CMOS low power consumption
Outputs Directly Interface to CMOS, NMOS, and TTL
Operating Voltage Range: 4.5 to 5.5V
Military Temperature Range for High Reliability
Lower power alternative to bipolar logic

Vendor:
Silicon Supplies
Electrical Datasheet

Die Physical Data:
Footprint: 1.209mm² (1874.111mil²)
Request Pad Layout

Product Families: Used for this device are tabulated below.

AND Gate

Functional:

I/P Level: CMOS/TTL
O/P Level: CMOS
Bits: 3
Schmitt Trigger: No

Specification:

V_{CC (Min)}: 4.50V
V_{CC (Max)}: 5.50V
f_MIN @ V_NOM: 90MHz
t_{pd (Max)} @ V_NOM: 10.5ns
I_{CC (Max)} @ V_NOM: 0.0800mA
V_{NOM (Max)}: 5.5V
Output Drive _(Max): 24.0mA

Other Detail: Important information for this device is tabulated below.

Traffic light setting for Minimum Order Quantity indicates the following:

Green:Available from stock or at low factory MOQ.
Amber: Available on factory order with MOQ.
Red: High factory MOQ may apply, please ask for details.

Traffic light setting for High Reliability indicates the following:

Green: This bare die is specified and tested for use in high reliability applications.
Amber: This bare die can meet higher reliability specifications with additional testing & qualification, please ask for details.
Red: This bare die is not specified or specifically designed for use in high reliability applications.

Traffic light setting for Space Grade indicates the following:

Green: This bare die is qualified for space applications or has space level qualification data, please ask for details.
Amber: This bare die can be specified for space applications with additional testing and qualification, please ask for details.
Red: Suitability of this bare die for space applications is unknown and requires further qualification, please ask for details.