Back to List

Bare Die Product Detail: 74HC595

Shift Register:
The 74HC595 is an 8–bit serial-in to parallel-out shift register driving an 8–bit D–type latch with 3–state outputs. Both register & latch have independent positive triggered clock inputs. The shift register also features asynchronous reset.

The device directly replaces legacy National 74HC195, Motorola 74HC195, RCA HARRIS 74HC195 and Texas Instruments SN74HC195, CD74HC195.

Features:

Smallest die size for this function using HC technology
8-bit serial input
8-bit serial or parallel output
Storage register with 3-state outputs
Shift register with direct clear
Output Drive Capability: 10 LSTTL loads
Bus Drive Capability: 15 LSTTL loads
Outputs Directly Interface to CMOS, NMOS, and TTL
Operating Voltage Range: 2.0 to 6.0V
Low Input Current: 1.0µA
High Noise Immunity Characteristic of CMOS Devices

Applications:

General purpose logic
Serial to Parallel Data conversion
Capture and hold data for extended periods of time
Enabling serial MCU bit streams for peripheral line control

Vendor:
Silicon Supplies
Electrical Datasheet

Die Physical Data:
Footprint: 0.793mm² (1229.309mil²)
Request Pad Layout

Product Families: Used for this device are tabulated below.

Shift Register

Functional:

I/P Level: CMOS
O/P Level: CMOS
3-State O/P: Yes

Specification:

V_{CC (Min)}: 2.00V
V_{CC (Max)}: 6.00V
f_MIN @ V_NOM: 28MHz
t_{pd (Max)} @ V_NOM: 30.0ns
I_{CC (Max)} @ V_NOM: 0.08mA
V_{NOM (Max)}: 6.00V
Output Drive _(Max): 7.8mA

Other Detail: Important information for this device is tabulated below.

Traffic light setting for Minimum Order Quantity indicates the following:

Green:Available from stock or at low factory MOQ.
Amber: Available on factory order with MOQ.
Red: High factory MOQ may apply, please ask for details.

Traffic light setting for High Reliability indicates the following:

Green: This bare die is specified and tested for use in high reliability applications.
Amber: This bare die can meet higher reliability specifications with additional testing & qualification, please ask for details.
Red: This bare die is not specified or specifically designed for use in high reliability applications.

Traffic light setting for Space Grade indicates the following:

Green: This bare die is qualified for space applications or has space level qualification data, please ask for details.
Amber: This bare die can be specified for space applications with additional testing and qualification, please ask for details.
Red: Suitability of this bare die for space applications is unknown and requires further qualification, please ask for details.