Bare Die Product Detail: SN74LV1T126

Non-Inverting Buffer/Driver:
Single Power Supply, Single BUFFER GATE w/ 3-State Output (active low enable)

Features:

Family: LV1T
Voltage(s) (Nom): 1.8, 2.5, 3.3, 5.5V
tpd @ Nom Voltage(s) : 14.5, 9.5, 8.0, 6.5ns
Output Drive I_OL/I_OH (Max): 8/-8mA
Features: 5V operation, 1.8V to 3.3V Up Translation, 3.3V to 1.8V Down Translation, 5V Input Tolerant
Logic: True

Vendor:
Texas Instruments
Electrical Datasheet

Die Physical Data:
Footprint: 0.310mm² (480mil²)
Request Pad Layout

Product Families: Used for this device are tabulated below.

Functional:

Bits: 1
I/P Level: TTL
O/P Level: CMOS
3-State O/P: Yes
Schmitt Trigger: No

Specification:

V_{CC (Min)}: 1.60V
V_{CC (Max)}: 5.50V
f_MIN @ V_NOM: 50MHz
I_{CC (Max)} @ V_NOM: 0.0100mA
V_{NOM (Max)}: 5.5V
Output Drive _(Max): 8.0mA
t_{pd (Max)} @ V_NOM: 6.5ns

Functional:

Bits: 1
I/P Level: TTL
O/P Level: CMOS
Function/Gate Type: BUFFER

Specification:

V_{CC (Min)}: 1.60V
V_{CC (Max)}: 5.50V
f_MIN @ V_NOM: 50MHz
I_{CC (Max)} @ V_NOM: 0.0100mA
V_{NOM (Max)}: 5.50V
Output Drive _(Max): 8mA
t_{pd (Max)} @ V_NOM: 6.5ns

Functional:

Bits: 1
I/P Level: TTL
O/P Level: CMOS
3-State O/P: Yes
Function/Gate Type: BUFFER

Specification:

V_{CC (Min)}: 1.60V
V_{CC (Max)}: 5.50V
f_MIN @ V_NOM: 50MHz
I_{CC (Max)} @ V_NOM: 0.0100mA
V_{NOM (Max)}: 5.5V
Output Drive _(Max): 8mA
t_{pd (Max)} @ V_NOM: 6.5ns

Other Detail: Important information for this device is tabulated below.

Traffic light setting for Minimum Order Quantity indicates the following:

Green:Available from stock or at low factory MOQ.
Amber: Available on factory order with MOQ.
Red: High factory MOQ may apply, please ask for details.

Traffic light setting for High Reliability indicates the following:

Green: This bare die is specified and tested for use in high reliability applications.
Amber: This bare die can meet higher reliability specifications with additional testing & qualification, please ask for details.
Red: This bare die is not specified or specifically designed for use in high reliability applications.

Traffic light setting for Space Grade indicates the following:

Green: This bare die is qualified for space applications or has space level qualification data, please ask for details.
Amber: This bare die can be specified for space applications with additional testing and qualification, please ask for details.
Red: Suitability of this bare die for space applications is unknown and requires further qualification, please ask for details.