Back to List

Bare Die Product Detail: 7407

Non-Inverting Buffer/Driver:
The 7407 Hex TTL Buffers / Drivers perform Boolean function Y = A in positive logic and feature 30V open-collector outputs. The device interfaces high-level circuits, drives high current loads and buffers TTL inputs.

The device directly replaces legacy Texas Instruments 7407 or SN7407.

Features:
** END OF LIFE ** NOT RECOMMENDED FOR NEW DESIGN

High Sink-Current Capability: 40mA
High Voltage Open-Collector Driver
Minimum 30V breakdown voltage
Input Clamping Diodes to minimize transmission-line effects
TTL compatible inputs
Direct drop-in replacement for obsolete components in long term programs
Function compatible with 74LS07

Applications:

Conversion of TTL voltage levels to MOS levels
Driving high current loads e.g. Lamps or Relays
Buffers for driving TTL inputs

Vendor:
Silicon Supplies
Electrical Datasheet

Die Physical Data:
Footprint: 2.030mm² (3146.510mil²)
Request Pad Layout

Product Families: Used for this device are tabulated below.

Non-Inverting Buffer/Driver

Functional:

I/P Level: TTL
O/P Level: TTL
Bits: 6
3-State O/P: No
Schmitt Trigger: No

Specification:

V_{CC (Min)}: 4.75V
V_{CC (Max)}: 5.25V
f_MIN @ V_NOM: 75MHz
t_{pd (Max)} @ V_NOM: 30.0ns
I_{CC (Max)} @ V_NOM: 41.0000mA
V_{NOM (Max)}: 5.0V
Output Drive _(Max): 40.0mA

Other Detail: Important information for this device is tabulated below.

Traffic light setting for Minimum Order Quantity indicates the following:

Green:Available from stock or at low factory MOQ.
Amber: Available on factory order with MOQ.
Red: High factory MOQ may apply, please ask for details.

Traffic light setting for High Reliability indicates the following:

Green: This bare die is specified and tested for use in high reliability applications.
Amber: This bare die can meet higher reliability specifications with additional testing & qualification, please ask for details.
Red: This bare die is not specified or specifically designed for use in high reliability applications.

Traffic light setting for Space Grade indicates the following:

Green: This bare die is qualified for space applications or has space level qualification data, please ask for details.
Amber: This bare die can be specified for space applications with additional testing and qualification, please ask for details.
Red: Suitability of this bare die for space applications is unknown and requires further qualification, please ask for details.