The device is direct replacement for the industry standard 74LVC1G04 or SN74LVC1G04 made by Texas Instruments (TI) and offers a highly flexible logic interface for integration within mixed voltage systems.
Features:
- Ideal for small form factor high integration applications
- Inputs directly interface TTL & CMOS
- Inputs accept up to 5.5V enabling level translation down to VCC
- Outputs directly interface CMOS, NMOS, and TTL
- Wide Supply Voltage: VCC 1.65V - 5.5V
- Output Drive capability: ± 32mA
- Low Quiescent Current: 4µA max
- High speed: tpd 3.7ns max, VCC = 3V
- Low Input Current: 1µA
- Stocked replacement for industry standard 74LVC1G04
- Committed long term support with no die mask changes
Applications:
- Interfacing mixed voltage systems
- Voltage Level Shifting
- Power Down Signal Isolation
- Single Controller: Analog and Digital
- General Purpose Logic
Vendor:
Silicon Supplies
Electrical Datasheet
Die Physical Data:
Footprint: 0.160mm² (255mil²)
Request Pad Layout
Silicon Supplies
Electrical Datasheet
Die Physical Data:
Footprint: 0.160mm² (255mil²)
Request Pad Layout
Product Families: Used for this device are tabulated below.
Functional:
- I/P Level: CMOS/TTL
- O/P Level: CMOS
- Bits: 1
- 3-State O/P: No
- Schmitt Trigger: No
Specification:
VCC (Min): 1.65V
VCC (Max): 5.50V
fMIN @ VNOM: 150MHz
tpd (Max) @ VNOM: 3.7ns
ICC (Max) @ VNOM: 0.0040mA
VNOM (Max): 5.5V
Output Drive (Max): 32.0mA
VCC (Max): 5.50V
fMIN @ VNOM: 150MHz
tpd (Max) @ VNOM: 3.7ns
ICC (Max) @ VNOM: 0.0040mA
VNOM (Max): 5.5V
Output Drive (Max): 32.0mA
Functional:
- Type: NOT
- I/P Level: CMOS/TTL
- O/P Level: CMOS
- Bits: 1
- Schmitt Trigger: No
- 3-State O/P: No
Specification:
VCC (Min): 1.65V
VCC (Max): 5.50V
fMIN @ VNOM: 150MHz
tpd (Max) @ VNOM: 3.7ns
ICC (Max) @ VNOM: 0.004mA
VNOM (Max): 5.50V
Output Drive (Max): 32.0mA
VCC (Max): 5.50V
fMIN @ VNOM: 150MHz
tpd (Max) @ VNOM: 3.7ns
ICC (Max) @ VNOM: 0.004mA
VNOM (Max): 5.50V
Output Drive (Max): 32.0mA
Other Detail: Important information for this device is tabulated below.
Traffic light setting for Minimum Order Quantity indicates the following:
- Green:Available from stock or at low factory MOQ.
- Amber: Available on factory order with MOQ.
- Red: High factory MOQ may apply, please ask for details.
Traffic light setting for High Reliability indicates the following:
- Green: This bare die is specified and tested for use in high reliability applications.
- Amber: This bare die can meet higher reliability specifications with additional testing & qualification, please ask for details.
- Red: This bare die is not specified or specifically designed for use in high reliability applications.
Traffic light setting for Space Grade indicates the following:
- Green: This bare die is qualified for space applications or has space level qualification data, please ask for details.
- Amber: This bare die can be specified for space applications with additional testing and qualification, please ask for details.
- Red: Suitability of this bare die for space applications is unknown and requires further qualification, please ask for details.
