Back to List

Bare Die Product Detail: 74ACT14

Inverting Buffer/Driver:
Hex Schmitt-Trigger Inverter performing Boolean function Y=Ā in positive logic. Inputs directly accept LSTTL & CMOS. Schmitt-Trigger inputs transform slow input rise/fall times to sharp jitter-free output. 24mA Sink/Source capability.

Suited for commercial applications, this bare die directly replaces Fairchild (FCH), National (NSC) 74ACT14, Motorola (MOT) MC4ACT14 & Texas Instruments (TI) SN74ACT14, CD74ACT14. Active electrical replacement/equivalent for bipolar 54LS14 & 54F14.

Features:
** END OF LIFE ** NOT RECOMMENDED FOR NEW DESIGN

Schmitt-Trigger Inputs
Inputs Directly Interface TTL
High Output Drive Capability: 24mA
Typical propagation delay below 10 nanoseconds
Speed of LSTTL with CMOS low power consumption
Outputs Directly Interface to CMOS, NMOS, and TTL
Low power dissipation: 2µA max at 25°C
Operating Voltage Range: 4.5 to 5.5V
Lower power alternative to bipolar logic

Vendor:
Silicon Supplies
Electrical Datasheet

Die Physical Data:
Footprint: 1.397mm² (2165.357mil²)
Request Pad Layout

Product Families: Used for this device are tabulated below.

Inverting Buffer/Driver

Functional:

I/P Level: CMOS/TTL
O/P Level: CMOS
Bits: 6
3-State O/P: No
Schmitt Trigger: Yes

Specification:

V_{CC (Min)}: 4.50V
V_{CC (Max)}: 4.50V
f_MIN @ V_NOM: 90MHz
t_{pd (Max)} @ V_NOM: 11.0ns
I_{CC (Max)} @ V_NOM: 0.0200mA
V_{NOM (Max)}: 5.5V
Output Drive _(Max): 24.0mA

Other Detail: Important information for this device is tabulated below.

Traffic light setting for Minimum Order Quantity indicates the following:

Green:Available from stock or at low factory MOQ.
Amber: Available on factory order with MOQ.
Red: High factory MOQ may apply, please ask for details.

Traffic light setting for High Reliability indicates the following:

Green: This bare die is specified and tested for use in high reliability applications.
Amber: This bare die can meet higher reliability specifications with additional testing & qualification, please ask for details.
Red: This bare die is not specified or specifically designed for use in high reliability applications.

Traffic light setting for Space Grade indicates the following:

Green: This bare die is qualified for space applications or has space level qualification data, please ask for details.
Amber: This bare die can be specified for space applications with additional testing and qualification, please ask for details.
Red: Suitability of this bare die for space applications is unknown and requires further qualification, please ask for details.