Back to List

Bare Die Product Detail: 74ACT05

Inverting Buffer/Driver:
74ACT05 consists of x6 independent inverters with open-drain outputs which can connect with other open-drain outputs to form active LOW wired-OR or active HIGH wired-AND logic functions. Open drain outputs need pullup resistors to perform correctly.

The device directly replaces legacy Motorola (MOT) MC74ACT05, RCA HARRIS CD74ACT05 and Texas Instruments (TI) CD74ACT05. See 74ACT04 for equivalent version without open-drain outputs.

Features:
** END OF LIFE ** NOT RECOMMENDED FOR NEW DESIGN

Propagation delay: 8.5ns Max
Outputs Source/Sink 24mAInputs directly accept LSTTL
Outputs Directly Interface to CMOS, NMOS, and TTL
Low Input Current: 1.0µA
Lower power alternative to bipolar logic
For high reliability version see part 54ACT05

Vendor:
Silicon Supplies
Electrical Datasheet

Die Physical Data:
Footprint: 1.386mm² (2148.307mil²)
Request Pad Layout

Product Families: Used for this device are tabulated below.

Inverting Buffer/Driver

Functional:

I/P Level: CMOS/TTL
O/P Level: CMOS
Bits: 6
3-State O/P: No
Schmitt Trigger: No

Specification:

V_{CC (Min)}: 4.50V
V_{CC (Max)}: 5.50V
f_MIN @ V_NOM: 90MHz
t_{pd (Max)} @ V_NOM: 8.5ns
I_{CC (Max)} @ V_NOM: 0.0400mA
V_{NOM (Max)}: 5.5V
Output Drive _(Max): 24.0mA

Other Detail: Important information for this device is tabulated below.

Traffic light setting for Minimum Order Quantity indicates the following:

Green:Available from stock or at low factory MOQ.
Amber: Available on factory order with MOQ.
Red: High factory MOQ may apply, please ask for details.

Traffic light setting for High Reliability indicates the following:

Green: This bare die is specified and tested for use in high reliability applications.
Amber: This bare die can meet higher reliability specifications with additional testing & qualification, please ask for details.
Red: This bare die is not specified or specifically designed for use in high reliability applications.

Traffic light setting for Space Grade indicates the following:

Green: This bare die is qualified for space applications or has space level qualification data, please ask for details.
Amber: This bare die can be specified for space applications with additional testing and qualification, please ask for details.
Red: Suitability of this bare die for space applications is unknown and requires further qualification, please ask for details.