The device directly replaces legacy Motorola (MOT) MC54ACT05, RCA HARRIS CD54ACT05 and Texas Instruments (TI) CD54ACT05. See 74ACT04 for equivalent version without open-drain outputs.
Features:
- Propagation delay: 10.8ns Max
- Outputs Source/Sink 24mA
- Inputs directly accept LSTTL
- Outputs Directly Interface to CMOS, NMOS, and TTL
- Low Input Current: 1.0µA
- Lower power alternative to bipolar logic
- Full military temperature range
** PART OBSOLETE - DISCONTINUED **
Vendor:
SiS OBSOLETE
Electrical Datasheet
Die Physical Data:
Footprint: 1.386mm² (2148.307mil²)
Request Pad Layout
SiS OBSOLETE
Electrical Datasheet
Die Physical Data:
Footprint: 1.386mm² (2148.307mil²)
Request Pad Layout
Product Families: Used for this device are tabulated below.
Functional:
- I/P Level: CMOS/TTL
- O/P Level: CMOS
- Bits: 6
- 3-State O/P: No
- Schmitt Trigger: No
Specification:
VCC (Min): 4.50V
VCC (Max): 5.50V
fMIN @ VNOM: 90MHz
tpd (Max) @ VNOM: 10.8ns
ICC (Max) @ VNOM: 0.0800mA
VNOM (Max): 5.5V
Output Drive (Max): 24.0mA
VCC (Max): 5.50V
fMIN @ VNOM: 90MHz
tpd (Max) @ VNOM: 10.8ns
ICC (Max) @ VNOM: 0.0800mA
VNOM (Max): 5.5V
Output Drive (Max): 24.0mA
Other Detail: Important information for this device is tabulated below.
Traffic light setting for Minimum Order Quantity indicates the following:
- Green:Available from stock or at low factory MOQ.
- Amber: Available on factory order with MOQ.
- Red: High factory MOQ may apply, please ask for details.
Traffic light setting for High Reliability indicates the following:
- Green: This bare die is specified and tested for use in high reliability applications.
- Amber: This bare die can meet higher reliability specifications with additional testing & qualification, please ask for details.
- Red: This bare die is not specified or specifically designed for use in high reliability applications.
Traffic light setting for Space Grade indicates the following:
- Green: This bare die is qualified for space applications or has space level qualification data, please ask for details.
- Amber: This bare die can be specified for space applications with additional testing and qualification, please ask for details.
- Red: Suitability of this bare die for space applications is unknown and requires further qualification, please ask for details.
