Back to List

Bare Die Product Detail: LM393A

Comparator:
Wide supply voltage dual comparator operating on single/split supply. Single supply produces a common mode range-to-ground. Split supply current drain is independent of voltage for lower power. Interfaces TTL,CMOS & MOS(in split supply config).

Direct replacement for legacy Motorola, Fairchild, National,ON, Philips,NXP, ST Micro & Texas Instruments LM393A. Small size bare die specified for high grade commercial applications with lowered max input offset voltage.

Features:
** END OF LIFE ** NOT RECOMMENDED FOR NEW DESIGN

Tightened V_OS(Max)
Single-Supply range: 2-36V
Split–Supply range: ±1.0V to ±18V
Very low supply current independent of supply voltage(1 mW/comparator at +5V)
Low current drain
Very low Input Offset Current
Very low input offset voltage
TTL, DTL, ECL, MOS, CMOS compatible outputs

Vendor:
Silicon Supplies
Electrical Datasheet

Die Physical Data:
Footprint: 0.548mm² (848.628mil²)
Request Pad Layout

Product Families: Used for this device are tabulated below.

Comparator

Functional:

Channels: 2

Specification:

Rail - Rail: Output: V_{S (Min)}: 2.00V
V_{S (Max)}: 36.00V
t_PLH: 0.3000µs
V_{OS (Max)}: 4.0mV
I_{IB (Max)}: 300.00000nA
I_{Q (Max)} per Channel: 0.5000mA

Other Detail: Important information for this device is tabulated below.

Traffic light setting for Minimum Order Quantity indicates the following:

Green:Available from stock or at low factory MOQ.
Amber: Available on factory order with MOQ.
Red: High factory MOQ may apply, please ask for details.

Traffic light setting for High Reliability indicates the following:

Green: This bare die is specified and tested for use in high reliability applications.
Amber: This bare die can meet higher reliability specifications with additional testing & qualification, please ask for details.
Red: This bare die is not specified or specifically designed for use in high reliability applications.

Traffic light setting for Space Grade indicates the following:

Green: This bare die is qualified for space applications or has space level qualification data, please ask for details.
Amber: This bare die can be specified for space applications with additional testing and qualification, please ask for details.
Red: Suitability of this bare die for space applications is unknown and requires further qualification, please ask for details.