Back to List

Bare Die Product Detail: LM193

Comparator:
Wide supply voltage dual comparator operating on single/split supply. Single supply produces a common mode range-to-ground. Split supply current drain is independent of voltage for lower power. Interfaces TTL,CMOS & MOS(in split supply config).

Direct replacement for legacy National, Philips, and Texas Instruments LM193 or LM193 MD8. This bare die is specified over the full military temperature range with lowered maximum input bias current.

Features:
** END OF LIFE ** NOT RECOMMENDED FOR NEW DESIGN

Tightened I_IB(Max)
Military Temperature Range, -55°C to +125°C for High Reliability
Single-Supply range: 2-36V
Split–Supply range: ±1.0V to ±18V
Very low supply current independent of supply voltage(1 mW/comparator at +5V)
Low current drain
Very low Input Offset Current
Low input offset voltage
TTL, DTL, ECL, MOS, CMOS compatible outputs

Vendor:
Silicon Supplies
Electrical Datasheet

Die Physical Data:
Footprint: 0.548mm² (848.628mil²)
Request Pad Layout

MIL-STD Qualification:
38534 Class K LAT

Product Families: Used for this device are tabulated below.

Comparator

Functional:

Channels: 2

Specification:

Rail - Rail: Output: V_{S (Min)}: 2.00V
V_{S (Max)}: 36.00V
t_PLH: 0.3000µs
V_{OS (Max)}: 9.0mV
I_{IB (Max)}: 300.00000nA
I_{Q (Max)} per Channel: 0.5000mA

Other Detail: Important information for this device is tabulated below.

Traffic light setting for Minimum Order Quantity indicates the following:

Green:Available from stock or at low factory MOQ.
Amber: Available on factory order with MOQ.
Red: High factory MOQ may apply, please ask for details.

Traffic light setting for High Reliability indicates the following:

Green: This bare die is specified and tested for use in high reliability applications.
Amber: This bare die can meet higher reliability specifications with additional testing & qualification, please ask for details.
Red: This bare die is not specified or specifically designed for use in high reliability applications.

Traffic light setting for Space Grade indicates the following:

Green: This bare die is qualified for space applications or has space level qualification data, please ask for details.
Amber: This bare die can be specified for space applications with additional testing and qualification, please ask for details.
Red: Suitability of this bare die for space applications is unknown and requires further qualification, please ask for details.