Innovate > Integrate > Empower - Design at Die Level

  Back to List

Bare Die Product Detail: AM26LV31E

RS-422 Interface IC:
Low-Voltage High-Speed Quadruple Differential Line Driver With +/-15-kV IEC ESD Protection
Features:
  • Supply Voltage(s) (Min):  3V
  • Supply Voltage(s) (Max):  3.6V
Vendor:
Texas Instruments
  Electrical Datasheet

Die Physical Data:
Footprint: 4.800mm² (7440mil²)
  Request Pad Layout
Product Families: Used for this device are tabulated below.
Functional:
  • Duplex: -
Specification:
ICC (Max) @ VNOM: 0.1mA
VS: 3.30V
Datarate: 32Mbps
ESD HBM: 15kV
Fault Protection Voltage: -V
Tx: 4Rx: 0Rx tpd:   n/a
Other Detail: Important information for this device is tabulated below.
Traffic light setting for Minimum Order Quantity indicates the following:
  • Green:Available from stock or at low factory MOQ.
  • Amber: Available on factory order with MOQ.
  • Red: High factory MOQ may apply, please ask for details.
Traffic light setting for High Reliability indicates the following:
  • Green: This bare die is specified and tested for use in high reliability applications.
  • Amber: This bare die can meet higher reliability specifications with additional testing & qualification, please ask for details.
  • Red: This bare die is not specified or specifically designed for use in high reliability applications.
Traffic light setting for Space Grade indicates the following:
  • Green: This bare die is qualified for space applications or has space level qualification data, please ask for details.
  • Amber: This bare die can be specified for space applications with additional testing and qualification, please ask for details.
  • Red: Suitability of this bare die for space applications is unknown and requires further qualification, please ask for details.

Other Featured Products:

CD4093B:
CMOS Quad 2-Input NAND Schmitt Triggers
SN74LS00:
Quad 2-input positive-NAND gates
CD4094B:
CMOS 8-Stage Shift-and-Store Bus Register
SN74LS139A:
Dual 2-line to 4-line decoders / demultiplexers
EA2M:
ON Semi Serial 2-Mb SPI Ultra Low-Power EEPROM with ECC for high reliability portable or battery applications.
NTC020N120SC1:
ON Semi 1200 Volt 20mOhm 103A Silicon Carbide MOSFET specified at >=175°C maximum junction temperature.