Innovate > Integrate > Empower - Design at Die Level

  Back to List

Bare Die Product Detail: AM26LS33AM

RS-422 Interface IC:
Quadruple Differential Line Receiver
Features:
N/A
Vendor:
Texas Instruments
  Electrical Datasheet

Die Physical Data:
Footprint: 3.773mm² (5848mil²)
  Request Pad Layout
Product Families: Used for this device are tabulated below.
Functional:
  • Duplex: -
Specification:
ICC (Max) @ VNOM: 70.0mA
VS: 5.00V
Datarate: 10Mbps
ESD HBM: 2kV
Fault Protection Voltage: -V
Tx: 0Rx: 4Rx tpd: 35ns
Other Detail: Important information for this device is tabulated below.
Traffic light setting for Minimum Order Quantity indicates the following:
  • Green:Available from stock or at low factory MOQ.
  • Amber: Available on factory order with MOQ.
  • Red: High factory MOQ may apply, please ask for details.
Traffic light setting for High Reliability indicates the following:
  • Green: This bare die is specified and tested for use in high reliability applications.
  • Amber: This bare die can meet higher reliability specifications with additional testing & qualification, please ask for details.
  • Red: This bare die is not specified or specifically designed for use in high reliability applications.
Traffic light setting for Space Grade indicates the following:
  • Green: This bare die is qualified for space applications or has space level qualification data, please ask for details.
  • Amber: This bare die can be specified for space applications with additional testing and qualification, please ask for details.
  • Red: Suitability of this bare die for space applications is unknown and requires further qualification, please ask for details.

Other Featured Products:

TL062:
Dual Low-Power JFET-Input General-Purpose Operational Amplifier
TL084:
JFET-Input Operational Amplifier
SN74ACT08:
Quadruple 2-Input Positive-AND Gates
SN74HCT00:
Quadruple 2-Input Positive-NAND Gates
EA2M:
ON Semi Serial 2-Mb SPI Ultra Low-Power EEPROM with ECC for high reliability portable or battery applications.
NTC020N120SC1:
ON Semi 1200 Volt 20mOhm 103A Silicon Carbide MOSFET specified at >=175°C maximum junction temperature.