Direct electrical & mechanical replacement for National Semiconductor (NSC) LM3086 or LM3086N. For use in differential & temperature compensated amplifiers or discrete transistors in standard circuits. Available in bare die + SOIC, PDIP, CERDIP.
Features:
- Two matched transistors
- VBE Match: ±5mV
- IIO Match: 2µA(Max)
- Low Noise Figure at 1KHz: 3.2dB
- Industrial Temperature Range
- Wide Operating Current range
- Smallest footprint for high integration & close placement to signal source.
- Audio Equipment
- General purpose small size transistor circuits
- Differential Amplifiers
- Temperature Compensated Amplifiers
** PART OBSOLETE - DISCONTINUED **
Applications:
Vendor:
SiS OBSOLETE
Electrical Datasheet
Die Physical Data:
Footprint: 1.040mm² (1612.625mil²)
Request Pad Layout
SiS OBSOLETE
Electrical Datasheet
Die Physical Data:
Footprint: 1.040mm² (1612.625mil²)
Request Pad Layout
Product Families: Used for this device are tabulated below.
Functional:
- # of Transistors: 5
Specification:
V(BR)CEO, VCES: 24V
IC(Max): 50mA
hFE1(Min): 40
hFE1(Typ): 100
hFE1 @ IC: 1mA
hFE2(Typ): 54
hFE2 @ IC: 10µA
VCE(sat)1(Typ): 0.23V
VCE(sat)1 IC/IB: fT(Typ): 550MHz
Noise Figure: 3.25dB
IC(Max): 50mA
hFE1(Min): 40
hFE1(Typ): 100
hFE1 @ IC: 1mA
hFE2(Typ): 54
hFE2 @ IC: 10µA
VCE(sat)1(Typ): 0.23V
VCE(sat)1 IC/IB: fT(Typ): 550MHz
Noise Figure: 3.25dB
Other Detail: Important information for this device is tabulated below.
Traffic light setting for Minimum Order Quantity indicates the following:
- Green:Available from stock or at low factory MOQ.
- Amber: Available on factory order with MOQ.
- Red: High factory MOQ may apply, please ask for details.
Traffic light setting for High Reliability indicates the following:
- Green: This bare die is specified and tested for use in high reliability applications.
- Amber: This bare die can meet higher reliability specifications with additional testing & qualification, please ask for details.
- Red: This bare die is not specified or specifically designed for use in high reliability applications.
Traffic light setting for Space Grade indicates the following:
- Green: This bare die is qualified for space applications or has space level qualification data, please ask for details.
- Amber: This bare die can be specified for space applications with additional testing and qualification, please ask for details.
- Red: Suitability of this bare die for space applications is unknown and requires further qualification, please ask for details.
