Innovate > Integrate > Empower - Design at Die Level

  Back to List

Bare Die Product Detail: SSL14A

200 Watt:
200W, 14V Uni-directional Transient Voltage Suppressor Bare Die (TVS) for wirebonding
Polarity configuration is top side Anode & bottom side Cathode. These bare die are metalized with Aluminium top side & Silver back side for wire-bond assembly. The small die size suits space constrained applications.
Features:
  • 200W peak pulse power capability at 10/1000µs waveform
  • Aluminum top metal for wirebonding
  • Silver back metal for soldering
  • High Reliability tested grades
  • Smaller die size for space constrained applications
  • Long term availablity
Vendor:
Silicon Supplies
  Electrical Datasheet

Die Physical Data:
Footprint: 0.931mm² (1443.403mil²)
  Request Pad Layout
Product Families: Used for this device are tabulated below.
Functional:
  • Direction: Uni-Directional
Specification:
VRRM: 14.00V
VBR (Min): 15.63V
VBR (Max): 17.17V
IT: 1mA
VC: 23.2V
IPP: 8.6A
IR @ VR: 0.08µA
Other Detail: Important information for this device is tabulated below.
Traffic light setting for Minimum Order Quantity indicates the following:
  • Green:Available from stock or at low factory MOQ.
  • Amber: Available on factory order with MOQ.
  • Red: High factory MOQ may apply, please ask for details.
Traffic light setting for High Reliability indicates the following:
  • Green: This bare die is specified and tested for use in high reliability applications.
  • Amber: This bare die can meet higher reliability specifications with additional testing & qualification, please ask for details.
  • Red: This bare die is not specified or specifically designed for use in high reliability applications.
Traffic light setting for Space Grade indicates the following:
  • Green: This bare die is qualified for space applications or has space level qualification data, please ask for details.
  • Amber: This bare die can be specified for space applications with additional testing and qualification, please ask for details.
  • Red: Suitability of this bare die for space applications is unknown and requires further qualification, please ask for details.

Other Featured Products:

SN74LS08:
Quadruple 2-Input Positive-AND Gates
CD74HC00:
High Speed CMOS Logic Quad 2-Input NAND Gates
SN74ACT86:
Quadruple 2-Input Exclusive-OR Gates
CD4070B:
CMOS Quad Exclusive-OR Gate
INN650N080BS:
650 Volt 29 Amp 60mOhm Gallium Nitride (GaN) MOSFET. Metalized with Aluminum on topside for wirebonding.
AMS1200013B3:
1200 Volt 13mOhm Silicon Carbide (SiC) MOSFET with customizable top metal back metals optimized for wire-bonding or sintering.