Innovate > Integrate > Empower - Design at Die Level

  Back to List

Bare Die Product Detail: ADS7886

Precision ADC (<=10MSPS):
2.35V-5.25V, 12 bit, 1MSPS, Serial ADC
Features:
  • Reference Mode:  Supply
  • Digital Supply:  2.35V
  • Digital Supply:  5.25V
Vendor:
Texas Instruments
  Electrical Datasheet

Die Physical Data:
Footprint: 1.382mm² (2142mil²)
  Request Pad Layout
Product Families: Used for this device are tabulated below.
Functional:
  • Bits: 12
  • Channels: 1
  • Interface: SPI
  • Architecture: SAR
  • Input Type: Single-Ended
  • Sim Sampling: No
Specification:
PC(Max): 13.50mW
AVDD (Min): 2.35V
AVDD (Max): 5.25V
SNR: 72.25dB
INL(Max): 1.25±LSB
SR(Max): 1,000.000KSPS
SINAD: 72.25dB
ADC VIN (Min): 0V
ADC VIN (Max): 5.250V
Other Detail: Important information for this device is tabulated below.
Traffic light setting for Minimum Order Quantity indicates the following:
  • Green:Available from stock or at low factory MOQ.
  • Amber: Available on factory order with MOQ.
  • Red: High factory MOQ may apply, please ask for details.
Traffic light setting for High Reliability indicates the following:
  • Green: This bare die is specified and tested for use in high reliability applications.
  • Amber: This bare die can meet higher reliability specifications with additional testing & qualification, please ask for details.
  • Red: This bare die is not specified or specifically designed for use in high reliability applications.
Traffic light setting for Space Grade indicates the following:
  • Green: This bare die is qualified for space applications or has space level qualification data, please ask for details.
  • Amber: This bare die can be specified for space applications with additional testing and qualification, please ask for details.
  • Red: Suitability of this bare die for space applications is unknown and requires further qualification, please ask for details.

Other Featured Products:

OPA2333:
1.8V, 17µA, microPower, Precision, Zero Drift CMOS Op Amp
SN74HC04:
Hex Inverters
SN74S08:
Quad 2-input positive-AND gates
UC2637:
Switched Mode Controller for DC Motor Drive
INN650N080BS:
650 Volt 29 Amp 60mOhm Gallium Nitride (GaN) MOSFET. Metalized with Aluminum on topside for wirebonding.
SiS8017:
4-channel CMOS / LVCMOS Digital Isolator eliminates current noise and provides up to 5kV RMS isolation per UL 1577.