Back to List

Bare Die Product Detail: OM7560A

CCD Interface:
12-bit ADC interface for CCD. including CTH circuit, PGA & low-power 12-bit ADC with reference voltage regulator. The CTH bandwidth is controlled serially by on-chip DACs. A 10-bit digital clamp controls the ADC input clamp level.

This highly flexible ADC front-end in bare die form suits CCD interfacing for all hi-rel and space applications running 5V based systems.

Features:

Clamp and Track/Hold (CTH) circuit with adjustable bandwidth, Programmable Gain Amplifier (PGA), 12-bit Analog-to-Digital Converter (ADC) and reference regulator
Fully programmable via a 3-wire serial interface
Sampling frequency up to 40 MHz
PGA gain from 0 to 36 dB (in 0.05 dB steps)
CTH programmable bandwidth from 35 to 284 MHz typical
Standby mode (20 mW typical)
Low power consumption of only 425 mW typical
5V operation and 2.5 to 5.25 V operation for the digital outputs
TTL compatible inputs; TTL and CMOS compatible outputs.
Hi-rel bare die availability

Applications:

CCD Camera Systems

Vendor:
IDT
Electrical Datasheet

Die Physical Data:
Footprint: 12.121mm² (18787.918mil²)
Request Pad Layout

Product Families: Used for this device are tabulated below.

CCD Interface

Functional:

Bits: 12
Channels: 1
V_CC: 5V
I/P Level: TTL
O/P Level: TTL,CMOS

Specification:

SR_(Max): 40MSPS
Gain _(Min): 0dB
Gain _(Max): 36dB
P_D: 425mW

Other Detail: Important information for this device is tabulated below.

Traffic light setting for Minimum Order Quantity indicates the following:

Green:Available from stock or at low factory MOQ.
Amber: Available on factory order with MOQ.
Red: High factory MOQ may apply, please ask for details.

Traffic light setting for High Reliability indicates the following:

Green: This bare die is specified and tested for use in high reliability applications.
Amber: This bare die can meet higher reliability specifications with additional testing & qualification, please ask for details.
Red: This bare die is not specified or specifically designed for use in high reliability applications.

Traffic light setting for Space Grade indicates the following:

Green: This bare die is qualified for space applications or has space level qualification data, please ask for details.
Amber: This bare die can be specified for space applications with additional testing and qualification, please ask for details.
Red: Suitability of this bare die for space applications is unknown and requires further qualification, please ask for details.