Innovate > Integrate > Empower - Design at Die Level

  Back to List

Bare Die Product Detail: SiS1057

Low Bias Current Amplifier:
20MHz wide bandwidth precision high speed amplifier with fast slew rate + settling time for high speed sample & hold circuits or data conversion. Low bias current and low offset characteristics benefit applications requiring precision at speed.
Military grade die operating -55° to +125° range & is a possible replacement for legacy Analog Device (AD) OP42, OP42NBC, OP16, OP17, Linear Tech LT1056, Harris Intersil HA0-2510-6 / HA0-2515-6 or National Semiconductor LF155, LF155A, LF156, LF156A.
Features:
** END OF LIFE ** NOT RECOMMENDED FOR NEW DESIGN
  • High temperature characterized
  • Fast settling time: 1.5 µs to 0.01%
  • Fast slew rate: 50µV/s
  • Wide gain bandwidth: 20 MHz
  • Low voltage and current noise
  • Very low 1/f corner
  • Low input bias current, offset voltage and offset drift
  • Offset adjust independent of drift and common-mode rejection
  • Large differential input voltage capability
  • Stable large capacitive loads (5,000 pF)
  • High common-mode rejection ratio
  • Large DC voltage gain

Applications:

  • Precision, High Speed Instrumentation
  • Logarithmic Amplifiers
  • Fast D/A and A/D converters
  • Opto amplifiers
  • Voltage-to-Frequency Converters
  • Frequency-to-Voltage Converters
  • Precision sample and hold circuits
  • Low noise applications using either high or low source impedance
  • Wideband, Low Noise, Low Drift Amplifiers
Vendor:
Silicon Supplies
  Electrical Datasheet

Die Physical Data:
Footprint: 2.053mm² (3182mil²)
  Request Pad Layout
Product Families: Used for this device are tabulated below.
Functional:
  • Channels: 1
  • Shutdown: No
Specification:
Rail - Rail: VS (Min): 10.00V
VS (Max): 44.00V
Gain BW: 20.000MHz
Slew Rate: 50.00V/µs
IIB (Max): 50.0pA
VOS (Max): 2.000mV
VOS Drift: 3.00µV/°C
IQ per Channel: 5.000mA
VN: 12.0nV√Hz
IO: 25mA
CMRR (Typ): 100dB
Functional:
  • Channels: 1
  • Shutdown: No
Specification:
Rail - Rail: VS (Min): 10.00V
VS (Max): 44.00V
Gain BW: 20.0000MHz
Slew Rate: 50.0000V/µs
VOS (Max): 2.000mV
VOS Drift: 3.000µV/°C
IIB (Max): 50.00pA
CMRR (Typ): 100dB
VN: 12.0nV√Hz
IQ per Channel: 5.00000mA
IO: 25.0mA
Other Detail: Important information for this device is tabulated below.
Traffic light setting for Minimum Order Quantity indicates the following:
  • Green:Available from stock or at low factory MOQ.
  • Amber: Available on factory order with MOQ.
  • Red: High factory MOQ may apply, please ask for details.
Traffic light setting for High Reliability indicates the following:
  • Green: This bare die is specified and tested for use in high reliability applications.
  • Amber: This bare die can meet higher reliability specifications with additional testing & qualification, please ask for details.
  • Red: This bare die is not specified or specifically designed for use in high reliability applications.
Traffic light setting for Space Grade indicates the following:
  • Green: This bare die is qualified for space applications or has space level qualification data, please ask for details.
  • Amber: This bare die can be specified for space applications with additional testing and qualification, please ask for details.
  • Red: Suitability of this bare die for space applications is unknown and requires further qualification, please ask for details.

Other Featured Products:

SN74HCT244:
Octal Buffers And Line Drivers With 3-State Outputs
SN74LS74A:
Dual D-type pos.-edge-triggered flip-flops with preset and clear
CD74HC74:
High Speed CMOS Logic Dual Positive-Edge-Triggered D-Type Flip-Flops with Set and Reset
CD4094B:
CMOS 8-Stage Shift-and-Store Bus Register
INN650N080BS:
650 Volt 29 Amp 60mOhm Gallium Nitride (GaN) MOSFET. Metalized with Aluminum on topside for wirebonding.
AMS1200013B3:
1200 Volt 13mOhm Silicon Carbide (SiC) MOSFET with customizable top metal back metals optimized for wire-bonding or sintering.